[SOLVED] excl_tens not working properly

[vwcd]

Hi,

I tested the excl_tens variable using OVC/BKZ/SCT200 the overcast information disappeared.

My atis test was:

http://www.uniatis.net/atis.php?arr=02C ... 509//95%20

[SBYS][information]H[at time]1720[Z][wind]120[degrees]6[knots][QNH]1016[hpa][temperature]7[dew point]2[transition level]55[runway]02C[expect approach]NDB[advise on initial contact you have information]H

Regads,

Wills

[Sami Ylismäki]

That happens because of this line in the settings: cloud_base :15000,SKC
Clouds above the altitude (first parameter) will be replaced with SKC (second parameter) if there are no clouds at 15000ft or below, otherwise only the clouds at 15000ft or below will be reported.

[vwcd]

Tks!

Wills