Clouds

Post Reply [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Nikita Kapko
Posts: 4
Joined: 21 Jun 2008, 16:40
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Clouds

Post by Nikita Kapko » 21 Jun 2008, 16:49

I sow two troubles with decoding of clouds:
1) after SCT clouds CB (if it presents) is lost always
2) only two groups of clouds is displayed (third group is lost)

maybe its errors of my format...

Sami Ylismäki
Site Admin
Posts: 31
Joined: 16 Jan 2008, 23:13
VATSIM ID: 878340
Location: Helsinki, Finland
Contact:

Re: Clouds

Post by Sami Ylismäki » 22 Jun 2008, 14:26

METAR or more likely the whole URL that was used when error occured would always be most helpful.

1) I didn't find any problem with CB report. FEW/SCT/BKN/OVC always reported CB where included.

2) This is due to the settings:

cloud_base :15000,SKC

This means the following: clouds at or above 15000ft will be excluded and SKC will be reported if no clouds are present after filtering and the report did not include CAVOK/SKC/etc.

Nikita Kapko
Posts: 4
Joined: 21 Jun 2008, 16:40
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: Clouds

Post by Nikita Kapko » 23 Jun 2008, 17:23

With 2) thanks. :oops:
For example:
My ATIS
http://www.uniatis.net/atis.php?arr=16& ... b]SCT020CB[/b]%20OVC040%2007/02%20Q1016%2016010070&debug
CB after SCT lost:
ATIS
[Odessa][ATIS information]H 1720[Z][ILS][approach][Runway in use]16[Runway surface conditions][dry and clear][breaking coefficient][,]70[TL]110[Present weather][wind]120[degrees]6[mps][Clouds][BKN]{400}[feet][SCT]{2000}[feet][OVC]{4000}[feet][Temperature]7[dew point]2[QNH]1016[hPa][Advise information]H[on first contact]

On EFHK ATIS CB after SCT works normaly. What trouble I have?

Sami Ylismäki
Site Admin
Posts: 31
Joined: 16 Jan 2008, 23:13
VATSIM ID: 878340
Location: Helsinki, Finland
Contact:

Re: Clouds

Post by Sami Ylismäki » 23 Jun 2008, 19:34

You seem to be missing %cumulus% in the format.

EFHK:

cloud_grp :FEW:[few]%cumulus%%cloudft_u%
cloud_grp :SCT:[scattered]%cumulus%%cloudft_u%
cloud_grp :BKN:[broken]%cumulus%%cloudft_u%
cloud_grp :OVC:[overcast]%cumulus%%cloudft_u%

UKZZ:

cloud_grp :FEW:[few]%cloudft_u%
cloud_grp :SCT:[SCT]%cloudft_u%
cloud_grp :BKN:[BKN]%cumulus%%cloudft_u%
cloud_grp :OVC:[OVC]%cloudft_u%



Oh and please, use the BBCode with URL's, because the long lines will be truncated and the URL encoding will break it up :)
E.g. (url)http://www.uniatis.net/atis.php?paramparamparam(/url)
..and replace ()'s with []'s

Nikita Kapko
Posts: 4
Joined: 21 Jun 2008, 16:40
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: Clouds

Post by Nikita Kapko » 24 Jun 2008, 09:01

Thanks Sami! :) And sorry about URL :)

Post Reply
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Who is online

Users browsing this forum: No registered users and 1 guest